회사소개 제품 / 사업

제품 / 사업
  • HS1000
  • HS2000
  • HS3000
  • HS3010
  • HS4000
⊙ HS1000 - Digital Ambient Light Sensor
HS 1000 은 주변 광센서 (ALS) 입니다. 인터럽트 기능 트라이 모드 12C 인터페이스, 다양한 전원관리기능으로 밧데리를 사용하는 스마트폰과 모바일 인터넷 장치, TV, 모니터등에 사용되며 주변광 밝기에 따른 디스플레이의 백라이트 강도 를 조절하는데 사용됩니다.
* Features
- Dual ALS and tri-mode I2C interface in a single package.
- Very low power consumption.
- Stand-by current 5µA (monitoring I²C interface only, Vdd=3V)
- ALS operational current 50µA per sensor.
* Ambient Light Sensing
- Dual ALS senses ambient light and provides 16-bit output counts on the I²C bus directly
proportional to the ambient light intensity.
- Photopic spectral response of ALS1 nearly matches human eye.
- Broadband response of ALS2 supports compensation for spectral shifts encountered
with different types of cover glass.
- Dynamic dark current compensation
- Linear response over the full operating range.
- Senses intensity of ambient light from 0.05 lux to 52k lux with 21bit effective resolution.(16-bit converter)
- Continuously programmable integration times .(6.25ms, 12.5ms, 25ms… to 800ms)
- Precision on-chip oscillator. (counts equal 0.1 lux at 100ms integration time)
* Additional Features
- Programmable interrupt function including independent upper and lower threshold
detection or threshold based hysteresis for ALS.
- Level or Edge Triggered interrupts.
- Automatic power down after single measurement or continuous measurements
with programmable interval time
- Wide operating voltage range. (2.3V to 3.6V)
- Wide operating temperature range. (-40ºC to 80ºC)
- I²C serial communication port.
- Standard mode – 100 kHz
- Fast mode – 400 kHz
- High speed mode – 3.4 MHz
- RoHS Compliant (Pb-Free, Halogen Free/BFR Free)
- Moisture Sensitivity Level , MSL3.
* Applications
- Senses ambient light conditions, saving display power in applications
such as:
• Smart phones, mobile internet devices, MP3 players, GPS.
• Mobile device displays
• Notebooks, Tablet PC, LCD Monitor, Flatpanel TVs, Digital Camera.
⊙ HS2000 - Digital Proximity Sensor with built-in IR LED
HS 2000 은 디지털 근접 센서, IR LED, LED driver가 통합된 근접센서입니다. 인터럽트기능, 트라이모드12C 인터페이스, LED 드라이버 다양한 전원관리 기능으로 밧데리를 사용하는 스마트폰과 모바일 인터넷 장치에 사용되며, 실시간 물체의 접근을 측정할 수 있습니다.
* Features
- Proximity sensor and IR LED in a single package
- Very low power consumption.
- Stand-by current 5µA (monitoring I²C interface only, Vdd=3V)
- Proximity sensing average operational current 100µA.
- Average LED sink current 75µA.
* Proximity Sensing
- Proximity detection distance threshold I²C programmable with 12bit resolution and
eight integration time ranges.(16-bit effective resolution)
- Effective for measuring distances up to 100mm and beyond
- Excellent ambient light rejection including sunlight (up to 50K lux) and CFL interference.
- Programmable LED drive current from 5mA to 160mA in 5mA steps, no external resistor required.
- User programmable LED pulse frequency.
* Additional Features
- Programmable interrupt function including independent upper and lower threshold
detection or threshold based hysteresis for proximity.
- Level or Edge Triggered interrupts.
- Proximity persistence feature reduces interrupts by providing hysteresis to filter
fast transients such as camera flash
- Automatic power down after single measurement or continuous measurements
with programmable interval time
- Wide operating voltage range. (2.3V to 3.6V)
- Wide operating temperature range.(-40ºC to 80ºC)
- I²C serial communication port.
- Standard mode – 100 kHz
- Fast mode – 400 kHz
- High speed mode – 3.4 MHz
- RoHS Compliant (Pb-Free, Halogen Free/BFR Free)
- Moisture Sensitivity Level , MSL3.
⊙ HS3000 - Digital Ambient Light & Proximity Sensor with built-in IR LED
HS 3000 은 디지털 근접 센서, IR LED, LED driver, 주변 광센서(ALS)가 통합된 근조도 센서입니다. 인터럽트 기능 트라이 모드 12C 인터페이스 LED 드라이버 다양한 전원관리기능으로 밧데리를 사용하는 스마트폰과 모바일 인터넷 장치에 사용되며, 실시간 물체의 접근을 측정할 수 있으며 주변광 밝기에 따른 디스플레이의 백라이트 강도를 조절하는데 사용됩니다.
* Features
- Proximity sensor, IR LED and dual ALS in a single package.
- Very low power consumption.
- Stand-by current 5μA (monitoring I2C interface only, Vdd=3V)
- ALS operational current 50μA per sensor.
- Proximity sensing average operational current 100μA.
- Average LED sink current 75μA.
* Proximity Sensing
- Proximity detection distance threshold I2C programmable with 12bit resolution and eight
integration time ranges.(16-bit effective resolution)
- Effective for measuring distances up to 100mm and beyond
- Excellent ambient light rejection including sunlight (up to 50K lux) and CFL interference
- Programmable LED drive current from 5mA to 160mA in 5mA steps, no external resistor required.
- User programmable LED pulse frequency.
* Ambient Light Sensing
- Dual ALS senses ambient light and provides 16-bit output counts on the I²C bus directly
proportional to the ambient light intensity.
- Photopic spectral response of ALS1 nearly matches human eye.
- Broadband response of ALS2 supports compensation for spectral shifts encountered
with different types of cover glass.
- Dynamic dark current compensation
- Linear response over the full operating range.
- Senses intensity of ambient light from 0.05 lux to 52k lux with 21bit effective resolution.
(16-bit converter)
- Continuously programmable integration times (6.25ms, 12.5ms, 25ms… to 800ms)
- Precision on-chip oscillator (counts equal 0.1 lux at 100ms integration time)
* Additional Features
- Programmable interrupt function including independent upper and lower threshold
detection or threshold based hysteresis for proximity and or ALS.
- Level or Edge Triggered interrupts.
- Proximity persistence feature reduces interrupts by providing hysteresis to filter
fast transients such as camera flash
- Automatic power down after single measurement or continuous measurements
with programmable interval time
- Wide operating voltage range. (2.3V to 3.6V)
- Wide operating temperature range. (-40ºC to 80ºC)
- I²C serial communication port.
- Standard mode – 100 kHz
- Fast mode – 400 kHz
- High speed mode – 3.4 MHz
- RoHS Compliant (Pb-Free, Halogen Free/BFR Free)
- Moisture Sensitivity Level , MSL3.
⊙ HS3010 - Digital Ambient Light & Proximity Sensor with built-in IR LED
HS 3010 은 디지털 근접 센서, IR LED, LED driver, 주변 광센서(ALS)가 통합된 근조도 센서입니다. 인터럽트 기능 트라이 모드 12C 인터페이스 LED 드라이버 다양한 전원관리기능으로 밧데리를 사용하는 스마트폰과 모바일 인터넷 장치에 사용되며, 실시간 물체의 접근을 측정할 수 있으며 주변광 밝기에 따른 디스플레이의 백라이트 강도를 조절하는데 사용됩니다.
* Features
- Proximity sensor, IR LED and dual ALS in a single package.
- Very low power consumption.
- Stand-by current 5µA (monitoring I²C interface only, Vdd=3V)
- ALS operational current 50µA per sensor.
- Proximity sensing average operational current 100µA.
- Average LED sink current 75µA.
* Proximity Sensing
- Proximity detection distance threshold I²C programmable with 12bit resolution and
eight integration time ranges.(16-bit effective resolution)
- Effective for measuring distances up to 100mm and beyond
- Excellent ambient light rejection including sunlight (up to 50K lux) and CFL interference.
- Programmable LED drive current from 5mA to 160mA in 5mA steps, no external resistor required.
- User programmable LED pulse frequency.
* Ambient Light Sensing
- Dual ALS senses ambient light and provides 16-bit output counts on the I²C bus directly
proportional to the ambient light intensity.
- Photopic spectral response of ALS1 nearly matches human eye.
- Broadband response of ALS2 supports compensation for spectral shifts encountered
with different types of cover glass.
- Dynamic dark current compensation
- Linear response over the full operating range.
- Senses intensity of ambient light from 0.05 lux to 52k lux with 21bit effective resolution.
(16-bit converter)
- Continuously programmable integration times .(6.25ms, 12.5ms, 25ms… to 800ms)
- Precision on-chip oscillator. (counts equal 0.1 lux at 100ms integration time)
* Additional Features
- Programmable interrupt function including independent upper and lower threshold
detection or threshold based hysteresis for proximity and or ALS.
- Level or Edge Triggered interrupts.
- Proximity persistence feature reduces interrupts by providing hysteresis to filter
fast transients such as camera flash
- Automatic power down after single measurement or continuous measurements
with programmable interval time
- Wide operating voltage range. (2.3V to 3.6V)
- Wide operating temperature range. (-40ºC to 80ºC)
- I²C serial communication port.
- Standard mode – 100 kHz
- Fast mode – 400 kHz
- High speed mode – 3.4 MHz
- RoHS Compliant (Pb-Free, Halogen Free/BFR Free)
- Moisture Sensitivity Level , MSL3.
⊙ HS4000 - Color Sensor & Proximity sensor with built-in IR LED
HS 4000 은 디지털 근접 센서, IR LED, LED driver, 가 통합된 고성능 칼라센서입니다. 인터럽트 기능 트라이 모드 12C 인터페이스 LED 드라이버 다양한 전원관리기능으로 밧데리를 사용하는 스마트폰과 모바일 인터넷 장치에 사용되며, 실시간 물체의 접근을 측정할 수 있으며 주변광 밝기에 따른 디스플레이의 백라이트 강도를 조절하는데 사용됩니다.
* Unique Features
- 30dB proximity threshold range
- 32:1 LED driver range
- PS high ambient rejection
- RGBC high IR rejection
- Dark current compensation
- RGB color sensors
- Clear light sensor
* Benefits
- Up to 100mm and beyond range
- Minimize IR LED power
- Operates in sunlight and CFL
- Oversaturation protection
- High dynamic range
- Display color correction
- Ambient light measurements
* Additional Features
- Interrupt on threshold detect
- 16-bit effective proximity threshold range
- Senses ambient light from 0.02 to 52k lux with 21-bit eff resolution
- Fast RGBC integration times, 50ms for 0.01 lux resolution
- Operates from 2.3 to 3.6V supply
- Ultra low power: 5µA standby, 50µA per RGB, 100µA PS, 75µA LED
- Wide operating temperature range. (-40ºC to 80ºC)
- I²C serial communication port.
- Standard mode – 100 kHz
- Fast mode – 400 kHz
- High speed mode – 3.4 MHz
- RoHS Compliant (Pb-Free, Halogen Free/BFR Free)
- Moisture Sensitivity Level , MSL3.
* Applications
- Saves display power by sensing human presence and ambient light
- Smart phones, mobile internet devices, MP3 players, GPS
- Mobile device displays and backlit keypads
- CIE color correction